防爆热油汀 - 型号HDBYT - 浙江合顿防爆科技有限公司

1、适用于环境温度：-20℃～+40℃；

2、适用于爆炸性气体混合物危险场所：1区、2区；

3、适用于可燃性粉尘场所：21区、22区；

4、适用于生产车间、控制室、分析化验室、加油站、仓库、洞窟等场所作为冬季取暖和加热室内温度之用；

5、执行标准：GB/T 3836.1、GB/T 3836.2、GB/T 3836.3、IEC 60079-0、IEC 60079-1、IEC 60079-7、IEC 61241-0、IEC 61241-1。

1.Suitable for ambient temperature: -20℃～+40℃;

2.Suitable for dangerous places of explosive gas mixture: 1 zone and 2 zone;

3.Suitable for combustible dust places: 21 and 22 districts;

4.It can be used in production workshop, control room, analysis laboratory, gas station, warehouse, cave and other places for heating and heating indoor temperature in winter；

5.Implementation standards: GB/T 3836.1, GB/T 3836.2, GB/T 3836.3, IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1.

1、铝合金压铸外壳，高速喷丸处理后，表面高压静电喷塑，耐腐蚀、抗老化。

2、不锈钢外露紧固件，防腐性能高。

3、产品由发热体、防爆接线盒-防爆控制盒和移动地脚三部分组成。

5、整体防爆结构为隔爆型与增安型组成的复合型。

6、发热体由内置加热器的若干储油密封散热片组成。导热油经加热后，自动沿着管路循环交替加热，形成稳定热源。

7、防爆接线盒与防爆控制盒为一个整体。接线盒为增安型防爆结构，电源线通过电缆引入装置进入接线盒与接线端子连接。防爆控制盒为

隔爆型防爆结构，平面隔爆面通过螺栓紧固连接与发热体连接形成整

体。内置的电器元器件有功率调控器、温度控制器、电源指示灯等。接线盒内外均设有接地装置。

8、移动地脚由支架和万向脚轮组成，通过机械固定于油汀形成整体，致使油汀可在较为光滑的地板或地面上自由移动和转换方向。

9、电缆布线。

1.Aluminum alloy die-casting shell, high-speed shot peening treatment, surface high-voltage electrostatic spraying, corrosion resistance, anti-aging.

2.Stainless steel exposed fasteners, high corrosion resistance.

3.The product consists of three parts: heating body, explosion-proof junction box-explosion-proof control box and mobile foot.

5.The whole explosion-proof structure is composed of explosion-proof type and Safety-increasing type.

6.The heating body is composed of several oil storage sealing radiators with built-in heaters. After heating, the heat conducting oil is automatically heated alternately along the pipeline to form a stable heat source.

7.Explosion-proof junction box and explosion-proof control box are a whole. The junction box is an explosion-proof structure with increased safety. The power cable enters the junction box through a cable introduction device and connects with the junction terminal. The explosion-proof control box is an explosion-proof structure. The plane explosion-proof surface is connected with the heating body through bolt fastening. The built-in electrical components include power regulator, temperature controller, power indicator lamp, etc. There are grounding devices inside and outside the junction box.

8.The movable foot is composed of a support and a universal caster, which is mechanically fixed to the oiling pad to form a whole, so that the oiling pad can move and change its direction freely on a smooth floor or ground.

9.Cable wiring.